Wireless dog fence
Dog Fence Systems
In a wireless pet containment system, the transmitter creates a
circular field. If your dog travels outside the boundary of that
field, he receives electric stimulation. Again, by repetition and
training, he learns to stay inside the field.
system is easier to install. But it doesn’t adapt to the shape of
your yard. You may also wind up restricting your dog’s movement
to only a portion of your yard. A wireless system is most effective
for a home that’s centered on your property. But since most people’s
homes are not so perfectly symmetrical, a wired system is probably
system is portable, so you can take it and your pet wherever you
go. Wireless is great for vacationing with your dog!
transmitter creates a circular containment zone (field) and the
radius is adjustable to fit your property. You can buy additional
transmitters to enlarge the containment area that create overlapping
zones and the dog can pass from one zone to another without receiving
Just plug in the transmitter some where inconspicuously in your
home, garage, or tool shed. The transmitter will then emit a radio
signal which will define the containment boundary for your pet.
Your pet wears a lightweight receiver collar which “listens” for
the signal. While the collar is receiving the signal, your dog is
free to run and play in your yard. When your pet approaches the
boundary of the signal area your pet will receive a warning beep.
If your dog does not retreat from the boundary a correction is given.
With a little simple training, your dog will quickly learn his boundaries.
up a wireless containment system only takes a few minutes and is
very easy. The transmitter plugs into any standard 110 volt outlet.
Since the signal will transmit reliably through walls and other
obstructions, it can be placed in any convenient and discreet location,
typically in the garage, tool shed, or a closet. Once you have set
up the area you can now adjust the range that is appropriate for
your dog and your yard.
(If you have a large or stubborn dog, this system is not likely
to work for you; therefore a buried wired system might work better.)
1. Place the transmitter in an indoor area near a standard electrical
outlet. (May be mounted on a wall.)
2. Plug the transmitter into a standard household outlet.
3. Activate the collar receiver.
4. Adjust the radius of the “safe zone” on the transmitter.
5. Walk the perimeter of the safe zone with the collar in your hand
to determine the actually boundary.
6. Once you have adjusted the signal to the perimeter you want,
mark the boundary by placing the training flags at the edge of the
Home : Pet Supplies